DG-WA30002NP User Manual
To use WPS function to set encrypted connection between this Access Point
and WPS-enabled wireless client by WPS, click ‘WPS Setting’ on the left of
the web management menu, and the following information will be displayed.
Here is the description of every setup item:
Parameter Description
Enable WPS Check this box to enable or disable WPS function. By
default check box is enabled.
Wi-Fi Protected
Setup Information
All information related to WPS will be displayed here,
they’re helpful when you’re setting up connections by
WPS.
WPS Status: Displays WPS status. If data encryption
settings of this Access Point has never been set,
‘unConfigured’ message will be displayed here.
(See Section
2-7 for detailed information) If data
encryption settings have been set before, ‘Configured’
message will be displayed here.
Self PinCode: This is the WPS PIN code of this Access
Point. This code is useful when you need to build wireless
connection by WPS with other WPS-enabled wireless
devices.
SSID: Displays the SSID (ESSID) of this Access Point.
56