DG-WA30002NP User Manual
59
DTIM Period Set the DTIM period of wireless radio. Do not modify
default value if you don’t know what it is, default value is 3
Data Rate Set the wireless data transfer rate to a certain value. Since
most of the wireless devices will negotiate with each other
and pick a proper data transfer rate automatically, it’s not
necessary to change this value unless you know what will
happen after modification.
N Data Rate Set the data rate of 802.11n clients, available options are
MCS 0 to MCS15, it’s safe to set this option to ‘Auto’ and
it’s not necessary to change this value unless you know
what will happen after modification.
Channel Width Select wireless channel width (bandwidth taken by wireless
signals of this Access Point). It is suggested to select ‘Auto
20/40MHz’. Do not change to ‘20 MHz’ unless you know
what it is.
Preamble Type Set the type of preamble of wireless radio. Do not modify
default value if you don’t know what it is, default setting is
‘Short Preamble’.
Broadcast ESSID Decides if the wireless Access Point will broadcast its own
ESSID or not. You can hide the ESSID of your wireless
Access Point (set the option to ‘Disable’), so only people
who know the ESSID of your wireless Access Point can get
connected.
WMM WMM (Wi-Fi Multimedia) technology, which can improve
the performance of certain network applications, like
audio/video streaming, network telephony (VoIP), and
others. When you enable WMM function, the Access Point
will define the priority of different kinds of data, to give
higher priority to applications which require instant
responding. Therefore you can improve the performance of
such network applications.
CTS Protect Enabling this setting will reduce the chance of radio signal
collisions between 802.11b and 802.11g wireless Access
Points. It is recommended to set this option to ‘Auto’.
TX Power You can set the output power of wireless radio. This value
can be set to less than 100% if your wireless coverage area
is small. This will enhance security (malicious / unknown
users in distance will not be able to reach your wireless
Access Point).
To Next Page
Loading...
Need help?
General
