DG-WA30002NP User Manual
The following message will be displayed on your web browser.
Here is the description of every button:
Parameter Description
Backup Settings Press ‘Save...’ button, and you’ll be prompted to
download the configuration as a file, default filename is
‘config.bin’, you can save it as another filename for
different versions, and keep it in a safe place.
Restore Settings Press ‘Browse…’ to pick a previously-saved
configuration file from your computer, and then click
‘Upload’ to transfer the configuration file to Access
Point. After the configuration is uploaded, the Access
Point’s configuration will be replaced by the file you
just uploaded.
Restore to Factory
Default
Click this button to remove all settings you made, and
restore the configuration of this Access Point back to
factory default settings.
84
To Next Page
Loading...
Need help?
General
