Digital Dream NCH02 - Rotary&Push Button Operation; Main Page Parameters (FRO, SRO, SJR)

NCH02 User’s ManualDigital Dream Motion Controller Page -15
Before the description from No.5,we’d like to explain the Rotary&Push Button.Pls note the Picture 4-2 as
above.By this button,it can decrease or increase the values by turnning the button,and push it to confirm.
When we need to edit a value,for example,FRO or SRO or SJR value and so on,firstly select it and push
the button,we can see the orignal values color is white and background is black,then we start to edit it by turning
the button,the values’ background color becomes to Blue.After we edited the value,and we push the button to
confirm it,the background turns to black color.Then Push the button again to exit the editting state.
This is the operation method for all the value editing.
There will be 4 Status at File Status:No file Loaded;U-Disk Detected;U-Disk Removed;G-code file name:
No File Loaded:When the controller cannot detect a U-disk and cannot load a file;
U-Disk Detected:When the U-disk is inserted and controller can detect the U-disk;
U-Disk Removed:When the U-disk is removed;
G-code file name:When the G-code file is selected and the controller is running the G-code file,it will
display the name of the G-code file.
3. File status:It shows the G-code file information and U-disk
4. Time display:This column shows the processing time of the G code operation.
Time keeping is halted during Pause.
5. FRO: FRO controls the Feed Speed.
The adjustment range is 0%~200%.By turnning the rotary button,adjust the value in 10% increments by
each click.
6. SRO:SRO controls the Spindle Speed.
The adjustment range is 0%~200%.By turnning the rotary button,adjust the value in 10% increments by
each click.The current spind speed #S=SRO*S(The fixed Spindle speed value)
7. SJR: SJR controls the jogging of the machine.
The adjustment range is 0%~100%.By turnning the rotary button,adjust the value in 10% increments by
each click.The Current Jog Speed #HF=SJR*HF(The fixed Jog Speed)
Picture 4-2 Rotary&Push Button On Handheld Controller of NCH02
- Rotary Button +
Push Button