Structure of This Guide
x
Structure of This Guide
This guide is organized as follows:
Chapter/
Appendix
Title Description
Preface Preface Describes the purpose, audience and conventions for
this guide.
Chapter 1 Product Description Provides an overview and features of the DECserver
716 and the DECserver 732 products, and defines
front panel and back panel components for both
DECservers.
Chapter 2 Installing Brackets on
the DECserver
Provides instructions for installing brackets on the
DECserver 716 and the DECserver 732.
Chapter 3 Installing and
Removing the Flash
RAM Card
Provides instructions for how to install and how to
remove the Flash RAM Card from the DECserver
716 or DECserver 732.
Chapter 4 Cabling Requirements Provides communication distances and cable length
requirements between associated devices and the
DECserver 716 or DECserver 732.
Chapter 5 Connecting and
Removing Cables and
AUI adapters
Describes how to connect cables to and remove
cables from the DECserver 716 or DECserver 732.
Appendix A Problem Solving Helps you identify and correct any problems during
and after installation.
Appendix B Connector and Pin
Assignments
Describes the cable pins assignment for the
DECserver 716 or DECserver 732 hardware
connectors and shows the cables used to interface to
the DECserver hardware.
Appendix C Product Specifications Provides the Physical, Environmental and Electrical
specifications for the DECserver 716 or DECserver
732.
To Next Page
Loading...
