Digital Projection E-Vision Laser 6500 Series - Setup and Operation; Inserting the Remote Control Batteries

Digital Projection
E-Vision Laser 6500 Series User Manual
Rev B August 2017
— 12 —
SETUP AND OPERATION
Inserting the Remote Control Batteries
1.
Remove the battery compartment
cover by sliding the cover in the
direction of the arrow.
2.
Insert the battery with the positive
side facing up.
3.
Replace the cover.
Caution:
1. Only use AAA batteries (Alkaline batteries are recommended).
2. Dispose of used batteries according to local ordinance regulations.
3. Remove the batteries when not using the projector for prolonged periods.