Digital Projection E-Vision Laser 6500 Series User Manual

Digital Projection
E-Vision Laser 6500 Series User Manual
Rev B August 2017
– 17 –
Setting an Access Password (Security Lock)
You can use the four (arrow) buttons to set a password and prevent unauthorized use of the projector.
When enabled, the password must be entered after you power on the projector. (See Navigating the OSD
on page 24 and Setting the OSD Language on page 25 for help on using OSD menus.)
Important:
Keep the password in a safe place. Without the password, you will not be able to use the projector.
If you lose the password, contact your reseller for information on clearing the password.
1.
Press the MENU button to open the
OSD menu.
2.
Press the cursor ◄► button to move to
the Settings 1 menu, press the cursor
▲▼ button to select Advanced 1.
3.
Press (Enter) / ► to enter the
Advanced 1 sub menu. Press the
cursor ▲▼ button to select Security
Lock.
4.
Press the cursor ◄► button to enter
and enable or disable security lock
function.
A password dialog box automatically
appears.

Digital Projection E-Vision Laser 6500 Series Specifications

General

Brand	Digital Projection
Model	E-Vision Laser 6500 Series
Category	Projector
Language	English