Digital Projection E-Vision Laser 6500 Series User Manual

Digital Projection
E-Vision Laser 6500 Series User Manual
Rev B August 2017
— 18 —
5.
You can use the cursor buttons
▲▼◄►
either on keypad or IR remote control
for password entry. You can use any
combination including the same arrow
five times, but not less than five.
Press the cursor buttons in any order to
set the password. Push the MENU
button to exit the dialog box.
6.
The password confirm menu appears
when user presses the power-on key in
case the Security Lock is enabled.
Enter the password in the order you set
it at step 5. In case you forget the
password, please contact the service
center.
The service center will validate the
owner and help reset the password.

Digital Projection E-Vision Laser 6500 Series Specifications

General

Brand	Digital Projection
Model	E-Vision Laser 6500 Series
Category	Projector
Language	English