24
Mobile stream
5.3.5
This menu allows you to configure the settings of a particular channel if the channel is being
viewed via mobile devices.
Channel: Choose the channel where the settings are applied.
Enable: Enable to allow to use mobile streaming on this channel
Resolution: Set the resolution.
FPS: This parameter defines the number of frames per second at the mobile session.
Bitrate Control: Select the bitrate level based on the complexity of the scene. For a simple scene,
such as gray wall is suitable constant bitrate (CBR). For more complex scene, such as busy street
is suitable variable bitrate (VBR).
Bitrate Mode: If you want to set the bitrate by yourself, then choose User-defined mode. If you
want to select the predefined bitrate, choose Predefined mode.
Bitrate: Enter manually or choose from the drop-down menu the data throughput during the
mobile session.
Audio: Tick the box if you want to hear the live sound at the mobile session. Make sure the
camera with audio capability is properly connected to the selected channel.
To Next Page
Loading...