36
PTZ Linkage
5.6.3
If you had connect the PTZ cameras, you can set the linkage between PTZ cameras and Motion
Alarm and/or external I/O sensor alarm. With the linkage function, you can turn your PTZ cameras
focus to the preset point when a motion or I/O alarm happens.
Channel: Select the channel to set.
Switch: Enable or disable the PTZ linkage function.
Alarm Type: Choose what kind of alarm will trigger the PTZ linkage function.
PTZ: Associates the PTZ camera with preset points. View preset point at 5.8.3.1 PTZ control
To Next Page
Loading...