37
Record Search & Backup
5.7
This section allows you to search and playback the recorded videos based on recording type,
channel, date and time parameters. You can also view and backup events and captured images.
General
5.7.1
1) Select the channel & the recording type (All/Normal/Alarm (including preset point & IO)/
Motion/IO/Manual).
2) Determine the recording date.
3) Click Search.
4) Select the recording from the table.
NOTE: Dates marked with orange triangles have video recordings.
5) Select the channels you want to playback.
6) Modify the start time and end time if necessary and then click Play.
Enter the playback interface, to view 5.7.4 Playback Video Recordings
To Next Page
Loading...