53
Motion Detection: Enable if you want to upload snapshots to Dropbox when the camera detects a
motion
Drive Name: Enter the cloud storage name for your DVR
Activate Cloud: Click to activate the function. An activation email will be sent to the Receiver
email account
Advanced E-mail Setup: Click to configure your email settings
Upgrade Cloud Storage: Click to upgrade the current cloud storage service
Process to start uploading the snapshots
1) Enable Cloud Storage and configure Cloud settings for channel(s).
2) Configure advanced e-mail settings in Advanced E-mail Setup.
3) Click Activate Cloud and wait for the verification email.
4) Click Activate Cloud in Dropbox link on verification email.
NOTE: Make sure to check your email and follow the link to complete cloud storage activation
within 3 minutes.
5) Enter your Dropbox account credentials.
Setting up the Cloud service is now complete. If you encountered any problems while activating
the Cloud service, please repeat steps from 3 to 5.
To Next Page
Loading...