EasyManuals Logo

DINGO 150 User Manual

Default Icon
179 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
BASIC CONTROL
Transmission:
The snowmobile is equipped with an automatic transmission - variator.
Transmission selector
lever is located in the right side in the direction of travel of the snowmobile and
serves for switching to forward or back running, as well as switching off the
neutral.
1. «F» - Forward running position. It is switched on when the lever is 'pushed
off' from the 'Neutral' position.
2. N» - Neutral;
3. «R» - Position «Reverse». Switching on is performed with a switch
shifting to 'pull' position;
Back run switching on is performed after the full stop of the snowmobile, it is
prohibited to switch it on in motion this may lead to transmission breakdown.
Back running may be used on a smooth surface only. Be attentive and careful
the snowmobile may develop a quite high speed!
Also, during the snowmobile movement it is prohibited to shift the
transmission
selector lever to 'N' position this may lead to transmission breakdown.
Back run switching on is performed only after the full stop of the snowmobile, it is
prohibited to switch it on in motion. Back running may be used on a smooth surface only.
During the snowmobile movement it is prohibited to shift the transmission selector lever to
'N' position this may lead to transmission breakdown.
23
BASIC CONTROLS

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DINGO 150 and is the answer not in the manual?

DINGO 150 Specifications

General IconGeneral
BrandDINGO
Model150
CategoryOffroad Vehicle
LanguageEnglish