Optimized layout for A4 print.
4
TECH_MAN_ENG_LTP
Dear Customer,
Thank you for purchasing a DINI ARGEO product.
This manual explains the installation and commissioning for the hydraulic weighing system for forklifts.
In particular, the installation of the sensor and the calibration of the indicator are described (with the corresponding adjustable ranges of values
and practical programming examples) to assist the technician during system installation.
For any additional information or specific requests, please contact your local dealer.
This publication is optimised for A4 printing.
Introduction
Weighing system specifications
POWER SUPPLY 5 Vdc, via external power supply unit.
MAXIMUM CAPACITY 4000 PSI / 280 bar.
RECOMMENDED RESOLUTION 20 kg for capacities up to 2500 kg.
50 kg for capacities up to 5000 kg.
100 kg for capacities up to 10000 kg.
RECOMMENDED MINIMUM WEIGHT 10 reading divisions.
PROTECTION RATING OF THE SENSOR IP65.
DISPLAY Backlit 25mm LCD with 6 high contrast digits and icons to indicate active functions.
KEYPAD Membrane, 5 keys.
PRINTER Optional (code OBTPRLT).
Requires power from the forklift
To Next Page
Loading...
Need help?
General
