This option specifies the LAN port’s ip address, and its Ethernet
network work mode.
Link speed & duplex:
This option specifies the Ethernet network’s work mode. It have:
Auto Detect,10Mbps/Half Duplex,10Mpbs/Full
Duplex,100Mbps/Half Duplex,100Mpbs/Full Duplex.
IP address: Set LAN IP address, default value is 192.168.11.1
Subnet mask: Sets the LAN subnet mask. Default value is
255.255.255.0
This option specifies get the DNS server ways: Dynamically
assigned via DNS(WAN IP address is DHCP IP) and set static
DNS (WAN IP address is static IP).
To Next Page
Loading...
