What to do if my Dion DTR250SS10 DVR remote control is not responding?
K
Kyle JacobsAug 14, 2025
Make sure that you are aiming the remote control correctly at the Dion DVR box without any obstructions. Also, check the batteries to ensure they are correctly inserted and not exhausted.
F
Fred CamachoAug 17, 2025
What to do if my Dion DTR250SS10 DVR has no sound?
P
pjacobsAug 17, 2025
First, press the MUTE button to check if Mute mode is activated. If it is not, try switching to another channel to see if the problem persists. You can also press the V+ button to attempt to resolve the issue.
J
James HudsonAug 21, 2025
How to fix Dion DTR250SS10 DVR when there is no picture?
T
thomasrachelAug 21, 2025
Check that the cables are securely fitted and that the aerial is connected properly. Press the TV / RADIO button to change the channel type.
J
James CookAug 25, 2025
What to do if my Dion DTR250SS10 DVR cannot make recordings?
H
Haley EvansAug 26, 2025
Check if there is enough free space on the hard drive. If not, remove old recordings. Disconnect the mains power and reconnect after 1 minute. Check for any messages which indicate if there is a problem with the drive. Use the Format hard drive menu option.
K
kathleenlynchAug 29, 2025
Why is there no picture on some channels of my Dion DVR?
G
Greg WilliamsAug 29, 2025
Make sure that your aerial is correctly installed and then re-tune your Dion DVR box. Also, ensure that the selected channel is broadcasting at the current time of day.
D
David ThompsonSep 1, 2025
Why is there no color on some channels (black and white) on my Dion DTR250SS10 DVR?
L
Laurie RileySep 1, 2025
Check if the same problem exists on other channels. Ensure the correct picture settings are selected.
D
dmartinSep 4, 2025
What to do if there are spots on some or all channels on my Dion DVR?
C
Charles MartinezSep 5, 2025
Check that the aerial is correctly connected and that the aerial is in good condition.
A
Andrew SellersSep 9, 2025
How to receive Channel Zero services on my Dion DVR?
M
melissamorrisSep 9, 2025
Leave your Dion DVR box in standby mode when not in use. The light will change from red to amber when Channel Zero is ready.