Directed Electronics Automate AM5 - After Programming a Feature; Accessing Features; Accessing Menus

35
© 2008 Directed Electronics All rights reserved.
While holding the integrated LED/Valet switch, change the feature 5.
by either pressing (Lock) for 1 short horn honk setting or pressing
(Unlock) for 2 short horn honk setting.
➤ After programming a feature
Additional features can be programmed.•
The other feature menu can be selected.•
The Learn Routine can be exited.•
➤ Accessing features
Release, then press and release the integrated LED/Valet switch •
the appropriate number of times to advance from the feature just
programmed to the feature you want to program.
Press and hold the integrated LED/Valet switch once more.•
➤ Accessing menus
Release, then press and hold the integrated LED/Valet switch. •
After 3-seconds, the unit advances to the next menu and the horn •
sounds the number of times corresponding to the menu selected
(once or twice).