Directed Electronics Automate AM5 Installation Guide

40
© 2008 Directed Electronics All rights reserved.
Transmitter learn routine
Open a door.1.
Turn the key to the On position.2.
Within 5 seconds, press and release the integrated LED/Valet switch 3.
the number of times as described in the Transmitter Programming
Grid shown below, and then Press the switch one time and HOLD it
The LED flashes and the horn honks (if connected) to confirm the
selected step. Do not release the integrated LED/Valet switch.
While holding the integrated LED/Valet switch, press the 4.

button on the transmitter you are programming.The vehicle’s horn
honks to indicate successful programming.
Note: It is not possible to teach a transmitter button to the system
more than one time. Up to 4 transmitters can be learned to your
Security System.
Release. Once the transmitter is learned, the integrated LED/Valet 5.
switch can be released.

Directed Electronics Automate AM5 Specifications

General

Brand	Directed Electronics
Model	Automate AM5
Category	Security System
Language	English