43
© 2008 Directed Electronics. All rights reserved.
Select a Feature. Press and release the Valet/3.
Program switch the number of times corresponding
to the feature you wish to change. For example, to
access the third feature, press and release 3 times.
Then press the button once more and HOLD it. The
horn honks the number of times equal to the feature
you have accessed. You can now release the
Valet/program switch.
Program the Feature. You can toggle the feature on 4.
and off using the remote control. Press the button to
lock the system to select options in ascending order.
Press the button that unlocks the system, to select
options in descending order.
Press the Remote Start button to reset a feature to
the factory default.
After selecting the feature you want, release the Va-5.
let/program switch.
Note:
Some features have more than two possible settings. Pressing or
will toggle through the two-honk and higher settings.
Once a feature is programmed:
Other features can be programmed within the same menus
Another menu can be selecteds
The learn routine can be exited if programming is completes
To Next Page
Loading...
Need help?
General
