7
© 2015 Directed. All rights reserved.
Basic Commands
Note: Button configuration also applies to the 1- way remote control.
Arm/Lock
Press and release
The alarm arms, doors lock (if connected), and the siren/horn sounds
and parking lights flash once. If Valet mode* is On, the doors lock with
no audio confirmation and the arm/lock indicator** is displayed. Exit
Valet mode to arm/lock the alarm normally.
Panic
Press and hold
The alarm Arms (or Locks in Valet) and, after two seconds, sounds
the siren/horn and flashes the parking lights. Press and release
again to stop panic.
Disarm/Unlock
Press and release
The alarm disarms, doors unlock (if connected), and the siren/horn
sounds and parking lights flash twice. Also turns panic off if on. If Valet
mode* is On, the doors unlock with no chirp confirmations and the
disarm/unlock indicator** is displayed. Exit Valet mode to disarm/
unlock the alarm normally.
Silent Mode™
Press and release or
Perform before the Arm/lock or Disarm/unlock command to use the
remote control in Silent Mode™.
To Next Page
Loading...