25
© 2015 Directed. All rights reserved.
Page Notification
The remote control can notify the user of a page by emitting beeps if
the vehicle’s status changes. For example, any vehicle violation such as
a door being unlocked.
Press
to select page On/Off. One beep is page On. Two beeps
is page Off.
Page notification Response
On 1 beep
Off 2 beeps
Note: When programmed Off, responses are only received when a
command from the remote control is performed. However, alarm trigger
pages are not received.
To exit programming mode:
The LCD remote control will exit programming mode after five seconds
of inactivity and will emit two long beeps.
To Next Page
Loading...