Directed 5305V - Advanced Commands; Additional Auxiliary Functions; Timer Mode

9
© 2015 Directed. All rights reserved.
Advanced Commands
Note: Button configuration also applies to the 1- way remote control.
Additional Auxiliary Functions.
Press and buttons simultaneously
Activates the optional auxiliary 4 convenience or expansion function
that you have added to your system.
The auxiliary output controls
Press and buttons simultaneously
Activates the optional auxiliary 5 convenience or expansion function
that you have added to your system.
The auxiliary output controls
Press and buttons simultaneously
Activates the optional auxiliary 6 convenience or expansion function
that you have added to your system.
The auxiliary output controls
Timer Mode
Press and buttons simultaneously
There are two types of timer modes and the system can be pro-
grammed to perform either one or the other, the factory setting is
timed mode. In timed mode, the system allows you to keep the engine
warm by automatically activating the remote start every three hours for
a maximum of six starting cycles.
The temperature mode checks every three hours to see if the tempera-
ture threshold of 0°F has been met or exceeded. If met or exceeded,
the vehicle then remote starts and runs for the programmed time, and
will check again three hours after shutting off. However, if the thresh-