26
© 2015 Directed. All rights reserved.
Owner Recognition
Owner Recognition is a feature avail able exclusively from Directed. Us-
ing the Directed Bitwriter®, a hand-held programming tool, your dealer
can program many of the system settings. The programmer makes it
possible to program different settings for each remote control that is
used with the system. Then, when ev er a specific remote control is used,
the system will recall the settings assigned to that remote control. Owner
Rec og ni tion lets up to four users of the system have different settings that
meet their specific needs. It is almost like having four separate alarms
in your vehicle, one for each user.
Owner Recognition cannot be programmed without a Directed Bitwriter
and the necessary soft ware. Check with your dealer for more informa-
tion.
Rapid Resume Logic
This Directed system will store its current state to non-volatile memory.
If power is lost and then reconnected, the system will recall the stored
state from memory. This means if the unit is in Valet Mode and the bat-
tery is dis con nect ed for any reason, such as servicing the vehicle, when
the battery is re con nect ed the unit will still be in Valet Mode. This ap-
plies to all states of the system including arm, disarm, and Valet Mode.
To Next Page
Loading...