Directed 5305V - Nuisance Prevention Circuitry

20
© 2015 Directed. All rights reserved.
2. Turn the ignition key to the OFF position, the engine will continue
running.
3. Exit and secure the vehicle
4. When returning to the vehicle simply disarm the system and follow
the previous "When you are ready to drive the vehicle" informa-
tion.
Note: If you are away from the vehicle for an extended amount of time,
the remote start will shut off after the programmed runtime expires or
when a shutdown input is received (see the previous Remote Start sec-
tion for a complete list of shutdown inputs).
This feature will not work if the brake pedal is being pressed or the
parking brake is disengaged.
Nuisance Prevention Circuitry
Your system has Directed’s Nuisance Prevention Circuitry® (NPC). It
prevents annoying repetitive trigger sequences due to faulty door pin
switch es or en vi ron men tal con di tions such as thunder, jack ham mers, or
airport noise.
For example, if the alarm triggers three times within a 60 - minute pe-
riod and each time the same sensor or switch triggers the alarm, NPC
will interpret those triggers as false alarms. After the third trigger, NPC
ignores, or by pass es, that sensor or switch (along with any other sen-
sors or switches sharing the same zone) for 60 minutes.
If the bypassed sensor tries to trigger the system while it is being by-
passed, the 60 - minute bypass period starts over. This ensures that a
sensor that continually triggers will remain bypassed.
Doors are covered by NPC differently - if the alarm is triggered by an
open door for three full cycles, the doors are bypassed until the trigger
ceases.