27
© 2015 Directed. All rights reserved.
Programming Options
Programming options control what your system does during normal op-
er a tion, and require few or no additional parts. However, some may
require additional in stal la tion labor.
The following is a list of the program settings, with the factory settings
in Bold:
• Active arming (only with the remote) or passive arming (au to mat ic
arming 30- seconds after the last door has been closed).
• Arming/disarming confirmation siren chirps On or off.
• The ignition controlled door lock feature On or Off: With this feature
on, the doors will lock three seconds after the ignition is turned on,
and the doors are closed, and unlock when the ignition is turned
off. With this feature off, the system will not lock the doors when the
ignition is turned on and will not unlock the doors when the ignition
is turned off. Ignition lock and unlock are independent features
and can be programmed separately, when using the Bitwriter.
• Passive door locking (with passive arming) or active door
locking (only when arming with the remote). Passive lock-
ing allows the vehicle’s doors to lock when the security sys-
tem passively arms (after the 30 second countdown). This
feature only works if passive arming has been programmed.
When programmed for passive arming and active lock, if the
system is disarmed without a door being opened, the system will
re-lock the doors when it passively rearms.
To Next Page
Loading...