34
© 2015 Directed. All rights reserved.
Document Terminology
Input
A physical connection to the system. Input may be provided
by a sensor, a pin-switch or through an existing system in the
vehicle, such as ignition or courtesy lights.
LCD
Liquid Crystal Display, the screen on the 2-way remote control.
It displays the vehicle status using symbols and icons, such as
alarm information.
Remote Control
1-way Companion
A hand-held remote control, also called transmitter that com-
mands and operates the various functions of your system but
does not provide feedback.
Remote Control
2-way
A hand-held remote control, also called transmitter, that oper-
ates the various functions of your system and receives messages
and pages from the system.
Siren
Noise generating device usually installed in the engine com-
part ment of the vehicle. It generates the “chirps” and the tones
you hear when the alarm is triggered.
Trigger or Triggered
Sequence
When the alarm “goes off” or “trips”, the system triggers a
sequence of siren sounding and parking lights flashing for a
programmed duration.
Warn Away®
Lighter impacts to the vehicle generate a Warning Zone re-
sponse, several seconds of siren chirps and parking light
flashes.
Zone
Input that the alarm recognizes as unique. Each input is con-
nected to a particular zone. Two or more inputs may share the
same zone.
To Next Page
Loading...