What does feature error mean on Directed Directechs DB3 Automobile Accessories?
An RSR feature file mismatch was detected for your Directed Automobile Accessories. Please contact Technical Support.
How to fix CAN bus incorrectly detected on Directed Automobile Accessories?
If the CAN bus is being incorrectly detected by your Directed Automobile Accessories, verify the CAN1 and CAN2 connections. Refer to “Installation (wiring diagrams & vehicle wiring reference charts)” to check the connections.
What does ISO 2 not detected mean for Directed Directechs DB3 Automobile Accessories?
If ISO 2 is not being detected by your Directed Automobile Accessories, it means the Orange/Black wire didn't detect the expected signal. Refer to “Installation (wiring diagrams & vehicle wiring reference charts)” to check the connections.
What does it mean if Directed Directechs DB3 Automobile Accessories says ISO 2 not detected?
If the Directed Automobile Accessories system indicates 'ISO 2 not detected,' it means the Orange/Black wire did not detect the expected signal. Consult the “Installation (wiring diagrams & vehicle wiring reference charts)” to verify the connections.
What to do if Directed Directechs DB3 Automobile Accessories is waiting to begin the programming sequence?
Make sure you are following the correct programming procedure.
What to do if Directed Automobile Accessories Key2GO initiated?
If your Directed Automobile Accessories system displays 'Key2GO initiated', please follow the steps indicated in 'Module programming' to complete the Key2GO programming.
What to do if Directed Remote Starter feature error?
An RSR feature file mismatch was detected. Please contact Technical Support.
What does 'RFTD disabled' mean in Directed Automobile Accessories?
If the Directed Automobile Accessories system indicates 'RFTD disabled,' 3x OEM Lock Remote Start Activation was attempted when the RFTD feature is disabled. Make sure 3x Lock Start is selected from the web in the flashing process.
Why is the brake not detected by my Directed Directechs DB3 Automobile Accessories?
The brakes were not detected, which prevents the system from shutting down the vehicle.
What to do if CAN1 is not detected on Directed Automobile Accessories?
If CAN1 isn't being detected by your Directed Automobile Accessories, verify the connections of the Tan and Tan/Black wires. Try waking up the data bus by turning the ignition on and attempting the process again. If your setup doesn't need this connection, you can skip this step by pressing the programming button 5 times.
Lists all functions compatible with the vehicle for installation.
Presents an alternative wiring diagram for the DB3 module installation.
Shows alternative locations of key components within the vehicle for installation.
Lists error codes indicated by LED flashes during module programming.
Addresses troubleshooting for OBDII features and external module sync issues.
Explains LED feedback for lock, unlock, trunk, and auxiliary commands received.
Lists LED indicators for various reasons of remote start unscheduled shutdown.
Explains LED indicators for Remote Start Ready (RSR) specific error conditions.
Describes methods to send commands like lock, unlock, and remote start.
Explains the "Get In and Go" feature for seamless takeover after remote start.
Explains the functionality and benefits of the SmartStart mobile application for vehicle control.
General| Brand | Directed |
|---|---|
| Model | Directechs DB3 |
| Category | Automobile Accessories |
| Language | English |
To Next Page