Directed DS4+ - User Manual

62 pages

Save Page as PDF

To Next Page

FORD6

INSTALLATION GUIDE

This product is intended for installation by a professional installer only! Attempts to install this

product by a person other than a trained professional may result in severe damage to a vehicle’s

electrical system and components.

2017-12-13

DS4+

Main Page

Questions and Answers

B
Barbara PollardSep 7, 2025
How to troubleshoot Directed Control Unit when module has no power?
- M
  Matthew GravesSep 7, 2025
  Make sure the D2D harness is connected and that 12 Volt is present between the red and black wires. If 12 Volt is present, the module may be defective.
M
Melanie ClarkSep 4, 2025
What causes a bypass processing error in Directed Automobile Accessories?
- M
  Manuel ManningSep 4, 2025
  Reset the module and try again. If the condition persists, please contact Technical Support.
J
Jessica SpencerSep 23, 2025
What to do if Directed Automobile Accessories has a DEI feature error?
- W
  wclarkSep 23, 2025
  A feature config file mismatch was detected. No other solution is available.
S
Stephanie FosterAug 27, 2025
What to do if Directed DS4+ Automobile Accessories module has no power?
- J
  Jaclyn LongAug 27, 2025
  First, ensure the D2D harness is connected and that there's 12V present between the red and black wires. If 12V is present, the module might be defective.
T
tuckerstevenAug 27, 2025
What to do if CAN1 is not detected on Directed DS4+ Automobile Accessories?
- M
  marcusfrankAug 27, 2025
  Check the CAN1 Tan and Tan/Black wire connections. Wake up the data bus by turning the ignition on and try again. If your installation does not require this connection, skip this step by pressing the programming button 5 times.
A
Alexis GordonAug 27, 2025
What to do if Directed Automobile Accessories bypass data not detected?
- J
  Jennifer SuttonAug 27, 2025
  Check the bypass line connection. If there's more than one wire, ensure they aren't inverted. Also, make sure the vehicle still operates correctly using the factory key.
B
beardlindaSep 15, 2025
What to do if Directed DS4+ Automobile Accessories has DEI feature error?
- K
  Kevin MyersSep 15, 2025
  Please contact Technical Support if you encounter a DEI feature error with your Directed Automobile Accessories.
D
Daniel BeckSep 9, 2025
What does it mean if OBDII feature is not supported in Directed Automobile Accessories?
- L
  Lisa BatesSep 9, 2025
  If the OBDII feature is not supported in your Directed Automobile Accessories, the diagnostic data bus was not detected, therefore the SmartStart features will be limited.
L
Lisa CollierSep 18, 2025
Why Directed DS4+ Automobile Accessories Speed was detected?
- A
  Alicia DukeSep 18, 2025
  The vehicle was detected as moving, which prevents the system from shutting it down.
M
Melissa MorrisSep 4, 2025
Why is the OBDII feature not supported on my Directed DS4+?
- J
  John McleanSep 4, 2025
  The diagnostic data bus was not detected, so the SmartStart features will be limited.