31
Dirtywave M8 Operation Manual
MIDI Mapping View
MIDI MAPPING
CTL V RANGE DEST
00 027 7F 7F> 00 I 01:VOL ATK
01 T:X 12 00> 7F I 02:CUTOFF
02 --- -- -- --
03 --- -- -- --
04 --- -- -- --
05 --- -- -- --
06 --- -- -- --
07 --- -- -- --
08 --- -- -- --
09 --- -- -- --
0A --- -- -- --
0B --- -- -- --
0C --- -- -- --
0D --- -- -- --
0E --- -- -- --
0F --- -- -- --
T>120
1 ---
2 ---
3 ---
4 ---
5 ---
6 ---
7 ---
8 ---
P
SCPIT
M
The MIDI mapping view is accessible from the project view. Midi mappings are MIDI
CCs (Continuous Control - knobs on an external MIDI controller) or the touchscreen that
are assigned to instrument or mixer parameters. Up to 128 mappings are available per
song. The destination parameter can only be assigned to one mapping, but one control/
touchscreen axis can control many parameters. Assign a MIDI CC or touchscreen to a
parameter by placing the cursor on the desired parameter, holding down the [OPTION]
key, and turning the MIDI CC or touching and sliding vertically or horizontally on the
touchscreen. All mappings are stored within the song le.
This view allows you view and edit the range of the mappings, as well as remove them
by pressing [OPTION]+[EDIT].
MIDI Mapping View Shortcuts
Navigating
• [DIRECTION] Move cursor.
• [OPTION] Exits view.
Editing
• [EDIT]+[UP or DOWN] Edits the selected value incrementing by large steps.
• [EDIT]+[LEFT or RIGHT] Edits the selected value incrementing by small steps.
• [EDIT]+[OPTION] Delete a mapping.
To Next Page
Loading...
