Dirtywave M8 - M8 Instruments and Synthesis; Wavsynth and Macrosynth Engines

36
Dirtywave M8 Operation Manual
Instruments
Wavsynth
INST. 00
TYPE WAVSYNTH LOAD SAVE
NAME ------------
SHAPE 00PULSE 12%
SIZE 00OFF
MULT 00
WARP 00
MIRROR 00
FILTER 00OFF
CUTOFF FF
RES 00
PAN 00
DRY C0
CHO 00
DEL 00
REV 00
T>120
1 ---
2 ---
3 ---
4 ---
5 ---
6 ---
7 ---
8 ---
P
SCPI T
M
TRANSP. ON
TABLE TIC 01
AMP 00
LIM 00CLIP
Wavsynth is a wave table synthesizer and noise generator. The wave table is an 8-bit
sample buer that is generated in realtime from one of 9 basic shapes that can be re-
peated, skewed/biased, mirrored, ltered and overdriven.
Wavsynth Parameters
• SHAPE - This selects from several standard shapes:
• PULSE 12% TO 75% - 4 Pulse width options. For pulse width modulation (PWM)
set the shape to “PULSE 50%” and adjust the “MIRROR” parameter. Smoothness
of the PWM is determined by the “SIZE” parameter.
• SAW - Saw wave.
• TRIANGLE - Triangle wave.
• SINE - Sine wave.
• NOISE PITCHED - Classic LFSR Noise with an in-tune tonal pitch.
• NOISE - Classic LFSR noise.
• OVERFLOW - Waveforms that explore the remnants of what exists when you go
o the grid.
• SIZE - Horizontal size of the waveform (number of samples).
• MULT - Multiplies the waveform by adding more and more repeats of the selected
shape. This can sound like a “hard sync” eect.