47
Dirtywave M8 Operation Manual
USB Features
USB Audio & MIDI
The M8 is USB audio and MIDI compliant. Audio input and output is 16-bit 2 channel
stereo only. It can work with any host computer including iOS and Android devices as
long as the power provided via USB is sucient (500mA USB standard).
USB Audio into the M8 can be monitored in the Mixer view by adjusting the volumes
under “USB”. It can also be recorded and saved in the Sample Editor view.
USB MIDI behaves the same way as the physical TRS MIDI connections allowing sync,
remote control, and sequencing. See MIDI Settings and the MIDI OUT Instrument views.
Remote Host Display
It is possible to stream the M8 display directly to a remote host computer via USB for
screen capturing and editing with the comfort of a large display. Please see the full list
of suggested host programs at https://dirtywave.com/support.
To Next Page
Loading...
