33
Dirtywave M8 Operation Manual
Recording MIDI Notes
Inserting and recording MIDI notes from an external controller can be accomplished by
selecting the correct “REC. NOTE CHAN” channel for your controller and highlighting a
note column in the phrase view. While the song is playing, notes will be inserted based
on the time they were played. Notes and instruments can be previewed when the cursor
is outside the note column.
Track MIDI Input
The M8 can act like a sound module, where each of the 8 tracks can be independently
controlled by an external sequencer or controller. Changing the instrument can be ac-
complished by sending a MIDI program change message from the external controller or
selecting the instrument number in the MIDI Settings view under the appropriate track
number.
• CHAN - MIDI channel selection for the given track.
• INST# - Instrument number to be used for the given track.
• PG CHANGE - Enable instrument selection via MIDI Program change messages.
• LEGATO MODE - Enable legato mode, overlapping notes will not cause the instru-
ment to retrigger.
MIDI Settings View Shortcuts
Navigating
• [DIRECTION] Move cursor.
• [OPTION] Exits view.
Editing
• [EDIT]+[UP or DOWN] Edits the selected value incrementing by large steps.
• [EDIT]+[LEFT or RIGHT] Edits the selected value incrementing by small steps.
• [EDIT]+[OPTION] Delete a mapping.
To Next Page
Loading...
