Dirtywave M8 - Page 44

39
Dirtywave M8 Operation Manual
Amplication Parameters (Continued)
• LIM - Set the limit / clipping behavior of the amplied signal.
• CLIP - Any value higher than the maximum level is clipped.
• SIN - The waveform is fed through a sine function.
• FOLD - Any value higher than the maximum level is folded back into itself.
• WRAP - Any value higher than the maximum level is vertically wrapped.
• POST - The amplication is applied with soft-clipping after the lter stage.
Mixer Parameters
• DRY - Dry volume sent to the mixer channel.
• CHO - Chorus send eect volume.
• DEL - Delay send eect volume.
• REV - Reverb send eect volume.