49
Dirtywave M8 Operation Manual
Samples “failed to load”
Check that the following are true:
• Sample is 8,16, or 24 bit and is mono or stereo.
• Sample is “PCM” or “PCM Raw”. Compressed samples do not work.
• The entire path length of the sample is under 128 characters.
The microSD card is not working
If the card you are using is the factory card that came with the M8, try reinserting it. If
it still does not work contact support@dirtywave.com. If you are using your own card
make sure it is formatted as described in the section about SD cards.
“CPU TOO BUSY” message
The cause of this message is almost certainly caused by the SD card being overworked.
Please refer to the section about SD cards.
The start-up sound is annoying
You can edit the start-up sound by opening the “STARTUP“ song le in /System. Dele-
ing or moving the le skips the intro entirely.
To Next Page
Loading...
