Dirtywave M8 - Page 58

53
Dirtywave M8 Operation Manual
Sequencer FX Commands (Continued)
PVB XY (Vibrato)
Apply vibrato to the currently playing instrument. Speed is set by X, and depth by Y.
PVX XY (Extreme Vibrato)
Same as PVB (Vibrato) above with a high and more extreme depth and rate.
SED XX (Random Seed)
Set the random seed (XX) for the current track. This will reset all random values to a
specic state.
TBL XX (Table)
Set the table number (XX) for the current instrument.
THO XX (Table Hop)
Hop/jump to a specic table position (0X). This command is identical to HOP when
used inside a table.
TIC XX (Table Tick)
Set the table tick rate for the current instrument. In a table this allows each FX com-
mand column to run at independent rates. You can also place this command on the last
table row. Refer to the section on Table View for information on the tick value.
TPO XX (Tempo)
Set the song tempo in BPM. Refer to the help text at the bottom of the screen to trans-
late the hex value to decimal.