dji AGRAS T30 - Page 56

54
©
2022 DJI All Rights Reserved.
AGRAS T30
Unmanned Aircraft Flight Manual
1
2
2
1
1
2
3. Reattach the bottom cover of the aircraft firmly and make sure that there is no gap between the
structures.
Reassembly
Follow the reverse operations of the disassembly steps above.
Propellers
Disassembly
1. Remove the two M5×15 propeller blade screws using a proper hex key.
2. Remove the propeller adapter, the four Teon gaskets, and two rubber washers above and under
each propeller blade.
M5×15 Screws
Rubber Washers
Teflon Gaskets