Ronin-MX
User Manual
34
©
2016 DJI All Rights Reserved.
Make sure that the Remote Controller is sufciently charged before use. If the
low-battery alert sounds, please recharge the battery as soon as possible.
Charge the Remote Controller’s battery using the included Micro USB cable.
Using the incorrect type of charging cable may cause damage.
Turn off the Remote Controller before charging. The power LED indicator will glow
solid green when the battery is fully charged.
When using the Remote Controller, ensure that the antenna is at least 20 cm
away from any person.
Remote Controller Power LED Indicator Status
Power LED Indicator Sound Remote Controller Status
—
Solid
Green None Functioning normally or fully charged
—
Solid Red None Charging (Remote Controller is powered off)
—
Solid Yellow None Control stick calibration error, re-calibrate
—
Solid Red BB---BB---BB Low voltage warning
Quick Red ashing BBBB…… Critical low voltage warning
Slow Green ashing B--B--B……
Alert will sound after 15 minutes of inactivity.
It will stop once you start using the Remote
Controller.
The Remote Controller will turn off automatically when battery voltage is too low.
Remote Controller Battery Level Indicator Status
The battery level indicator displays the current battery level. The following is a description
of the indicators.
:
The LED is solidly lit
:
The LED is blinking
:
The LED is off
LED1 LED2 LED3 LED4 Current Battery Level
75% to 100%
50% to 75%
25% to 50%
12.5% to 25%
0% to 12.5%
<0%