4.1 Location
（1）Place the centrifuge on a firm, flat and level table, ensure the four feet of this centrifuge stand on the
table firmly. Avoid installing on the slippery surface or surface prone to vibration.
（2）Ideal ambient temperature is 20℃±5℃, avoid placing the centrifuge in direct sunlight if temperature
exceeds 30℃.
（3）Keep clear of the centrifuge at least 10cm on both sides and at least 30cm behind it to guarantee the
cooling efficiency.
（4）Keep away from heat or water to avoid sample temperature issues or centrifuge failures.
4.2 Connection of the power cord and grounding
WARNING：
⚫ To avoid electrical shocks, ensure your hands are dry when touching the power cord.
⚫ This centrifuge must be grounded properly.
A minimum 10A outlet providing a sufficient ground is required, and this must meet with local safety
requirements.
5. Structure
D3024
Door lock hook
Seal ring of door
Operation panel
Cover
POWER switch
Figure 5.1 D3204 Front view of centrifuge
To Next Page
Loading...
