24 BA FlexxPump 125 - 24 V_20181121_EN de 201811
Messages and Faults
6. Messages and Faults
The following messages can appear in the LCD of the FlexxPump 125.
LCD display Meaning Remedy
OFF The FlexxPump 125 is
connected and ready for
operationt
PAU The FlexxPump 125 is
connected and waiting for a
signal from the controller
ON The FlexxPump 125 is
in operation and feeds
lubricant according to time
or pulse specication
E1 Empty level Change the cartridge
E2 No cartridge available Screw on cartridge
E3 Undervoltage Adapt supply voltage
Acknowledge error message.
E7 Overpressure Check lubricating points.
Check setting of pressure
parameter (P).
To Next Page
Loading...
