DLS FlexxPump 125 - Erorr E7 Overpressure

34 BA FlexxPump 125 - 24 V_20181121_EN de 201811
External Control
7.2.6. Error E7 overpressure
The error E7 signals exceeding of the maximum pressure during a dosing process.
U
0 V
24 V
t
> 3 s
PIN 4
Description:
• On reaching the set maximum pressure, the FlexxPump 125 sends a permanent low-level
signal, no more control signals are processed.
• The error message must be acknowledged with the 10sec signal after the error has been
cleared.