DMP Electronics 734N - Product Specifications; Primary Power Current Draw; When Powered from POE Current Draw

38 734N Installation and Programming Guide | Digital Monitoring Products, Inc.
PRODUCT SPECIFICATIONS
Primary Power 8.5 VDC to 28.5 VDC if 12/24 VDC
Current Draw
Standby 346mA at 12 VDC (includes 200mA for proximity reader)
+1.6 mA per active zone
Alarm 348 mA at 12 VDC (includes 200mA for proximity reader)
+10 mA with Annunciator ON
+2 mA per faulted zone
Form C Relay 35 mA at 12/24 VDC
When powered from POE
Standby 243 mA (includes 200mA for proximity reader)
+1.6 mA per active zone
Alarm 273mA (includes 200mA for proximity reader)
+10 mA with Annunciator ON
+2 mA per faulted zone