44 7800 Series Installation and Programming Guide | Digital Monitoring Products, Inc.
Clean the Keypad
Failure to follow cleaning recommendations may result in equipment damage.
• Do not use harsh cleaners to clean keypad surfaces.
• Do not oversaturate cleaning cloths or allow cleaner to make contact with internal
electronic components, cables, or power sources.
• Do not apply excessive force to keypad displays, touchscreens, keys, or housings
when cleaning.
• Do not spray cleaner directly onto the keypad. Use alcohol sprays or wipes that
contain 70% isopropyl alcohol.
1. Use an alcohol wipe or spray a small amount of rubbing alcohol onto a clean, dry
microfiber cloth to gently wipe down all keypad touch surfaces, removing any
excess cleaner.
2. Wait 10 seconds, then completely dry all keypad surfaces.
3. If necessary, use a clean, dry microfiber cloth to gently remove streaking.
To Next Page
Loading...
Need help?
General
