Digital Monitoring Products, Inc. | 7800 Series Installation and Programming Guide 37
Arm and Disarm the System
Area System Type
1. Tap the home screen shield in the center of the keypad. Tap your preferred option.
2. If arming, the keypad displays ALL? NO YES. Select NO to arm individual areas.
Select YES to arm all areas.
3. If disarming, the keypad displays ENTER CODE: -. Enter your user code or present
a credential to the reader.
All/Perimeter System Type
1. Tap the home screen shield in the center of the keypad.
2. If arming, select ALL to arm all areas or PERIM to arm only the perimeter. If ENTER
CODE: displays, enter a user code at the keypad or present a credential to the
proximity reader.
3. If disarming, enter a user code at ENTER CODE: or present a credential to the
proximity reader.
Home/Sleep/Away System Type
1. Tap the home screen shield in the center of the keypad.
2. If arming, HOME SLEEP AWAY displays. Select HOME to arm the perimeter, select
SLEEP to arm everything except the bedroom areas, or select AWAY to arm all
areas. If a selection is not made, all areas will automatically arm AWAY.
3. If ENTER CODE: displays, enter a user code at the keypad or present a credential
to the proximity reader.
To Next Page
Loading...
Need help?
General
