30 7800 Series Installation and Programming Guide | Digital Monitoring Products, Inc.
System Type
Program the keypad as the same system type selected in panel
programming.
Dealer Logo
Use this option to add a custom dealer logo to the main screen
of the keypad. Prior to selecting ADD, insert a microSD card
containing the logo file in to the slot on the right side of the
keypad. Refer to Figure 13. Select ADD to upload the file to the
keypad.
Adding Logo Sure? The keypad will display ADDING LOGO
SURE?. Select YES to proceed. While the logo is being
uploaded, the keypad displays ADDING LOGO. ADDING LOGO
COMPLETED displays to confirm a successful upload.
Dealer Info
Select ADD at the DEALER INFO prompt to include
information about the dealer when the logo is pressed.
The keypad displays ADDING INFO SURE? to confirm the
selection. Press YES to proceed.
Adding Info Sure? While the info is being uploaded to the
keypad, the keypad displays ADDING INFO. ADDING INFO
COMPLETED displays to confirm a successful upload. Press
and release the microSD card to eject.
SYSTEM OPTIONS
AREA A/P H A/A HSA
DEALER LOGO
ADD DELETE
ADDING LOGO
SURE? NO YES
DEALER INFO
ADD DELETE
ADDING INFO
SURE? NO YES
To Next Page
Loading...
Need help?
General
