Digital Monitoring Products, Inc. | 7800 Series Installation and Programming Guide 27
Require Site Code
Press the top row select key or area under YES to use a site
code and press CMD to view the site code entry display. Press
NO to advance to NO OF USER CODE DIGITS. Default is NO.
In addition to user code verification, door access is only
granted when any one site code programmed at the SITE
CODE ENTRY option matches the site code received in the
Wiegand string.
Site Code Display: You can program up to eight 8-digit site
codes. The site code range is 0-16,777,214.
In the keypad display, enter site code 1 and press CMD. The
display will ask for site code 2 followed by site code 3 and so
on. When you have selected the site code you want to change,
press CMD.
REQUIRE SITE
CODE: NO YES
SITE CODE 1:
To Next Page
Loading...
Need help?
General
