User Menu XT30/XT50 User Guide 41
5. At the OUTPUT NO: – display, enter the output number you
want to program. Press the CMD key.
6. The screen displays SUN MON TUE WED. Press the CMD key
to display THU FRI SAT. Select the day that you want to set
up a schedule on.
7. The keypad displays TURN ON AT. Press the second select
key or area.
8. Select SUNRISE or SUNSET and then use the select keys or
areas below the - and + to set an offset time. Choose from
5, 10, 15, 30, 45, or 60 minutes before or after sunrise or
sunset.
9. Press CMD.
10. The keypad displays TURN OFF AT. Press the second select
key or area.
11. Select SUNRISE or SUNSET and then use the select keys or
areas below the - and + to set an offset time. Choose from
5, 10, 15, 30, 45, or 60 minutes before or after sunrise or
sunset.
12. Press CMD to save the schedule.
4. The keypad displays PRM EXT OUT FAV. Select OUT.
Favorite Schedules
User Code Level: Master only.
Setting Favorite (FAV) schedules
The Schedules function allows you to set up a schedule for the
Favorites programmed in your system. The Favorite will activate at
the scheduled time.
1. Access the User Menu.
2. Press CMD until SCHEDULES? displays. Press any select key
or area.
3. The keypad displays
PRM EXT OUT FAV.
Select FAV.
4. At the FAVORITE: – display, enter the Favorite number
(1-20) you want to schedule. Press the CMD key.
5. The keypad displays SUN MON TUE WED. Press the CMD key
to display THU FRI SAT.
6. Select the day you want to program.
7. a. If a time has not been set for the day selected, the
keypad then displays ACTIVATE TIME. This is followed by
the display MON – : AM PM.
Enter the activate time and select AM or PM.
Enter all schedule times using a 12 hour clock. For example,
to enter 6 AM you would enter a 0 + 6 + 0 + 0 and Select AM.
For 11 PM you would enter a 1 + 1 + 0 + 0 and Select PM.
b. If a time has been set for the day selected, the keypad
displays Act Time with the time programmed. Press a select
key or area to display the DELETE and KEEP options. Select
DELETE to enter a new time. Select KEEP to keep the
current time setting.
8. The keypad returns to the day of the week display allowing
you to enter another Favorite schedule. To exit the user
menu or to go back to the SCHEDULES? display, press the
Back Arrow key.
To Next Page
Loading...
Need help?
General
