26 XT30/XT50 User Guide User Menu
Z-Wave Setup
User Code Level: Master.
Your system may include a DMP Z-Wave controller module attached
at installation. The Z-Wave controller module allows short range
radio control of Z-Wave devices that you or your installation
company may provide such as lighting control modules, thermostat
controls, doors and garage doors. Z-Wave Setup allows you to
program the system to control the Z-Wave devices. You may control
your Z-Wave devices from your smart phone device using the DMP
Virtual Keypad App or from your keypad by activating a Favorite
from the Favorites User Menu. The available setup options are:
Add, List, Remove, Favorites, Transfer and Optimize.
• Select ADD to add a Z-Wave device to your system.
• Select LIST to display a list of Z-Wave devices already added
and stored in your system.
• Select REMOVE to completely remove a Z-Wave device from
your system.
• Select FAV to Add, Edit or Remove a Favorite.
• Select XFER to transfer Z-Wave device information from
another manufacturer’s portable Z-Wave controller to your
system.
• Select OPT to update communication with all Z-Wave
devices programmed on your system. OPT can be used to
re-establish communication after the Z-Wave device has
been moved to a different location.
Favorite
User Code Level: Master, Standard, or Limited.
Allows you to activate a Z-Wave Favorite. Z-Wave devices can
be grouped together to create Favorites. Favorites can only be
activated, or turned on. A separate Favorite must be created to
change the conditions set by the rst Favorite. For a complete
description on how to add a Favorite to activate, see Adding a
FAVORITE in Z-Wave Setup.
1. When FAVORITES? displays, press any select key or area. The
keypad displays FAVORITE: -.
2. Enter a Favorite number from 1-20. Pressing CMD activates
the Favorite.
To Next Page
Loading...
Need help?
General
