7.2 Common Faults and Troubleshooting ............................................................................... 21
8. REPLANCEMENT OF WEARING PARTS .............................................................................. 22
9. SPARE PARTS LIST .................................................................................................................. 23
10. EXPLODED VIEW OF SPARE PARTS(需要替换清晰图片) ................................................ 27
1. SAFETY INSTRUCTION
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1.1 Personal Safety
Stay alert, watch what you are doing and use common sense when operating a power
tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol
or medication. A moment of inattention while operating power tools may result in serious
personal injury.
Use personal protective equipment. Always wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in the off-position before connecting
to power source and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or energising power tools that have
the switch on invites accidents.
Remove any adjusting key or wrench before turning the power tool on. A wrench or a
key left attached to a rotating part of the power tool may result in personal injury.
Do not overreach. Keep proper footing and balance at all times. This enables better
control of the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in
moving parts.
If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used. Use of dust collection can reduce dust-
related hazards.
The operators must be trained strictly and correctly, and read & understand the
operation instructions of the machine correctly. If the operation instructions are not
followed or the straps is placed incorrectly, the straps will be damaged and the operator will
be injured.
Before getting start with the machine,please keep your fingers away from the tension
To Next Page
Loading...