DMS Q31 - Work Area Safety; Power Tool Use And Care; Battery Tool Use And Care

and cutting area of the machine.
 Do not use the bonded straps to carry, drag or suspend the heavy object, which may
cause accidents.
1.2 Work Area Safety
 Keep work area clean and well lit. Cluttered or dark areas invite accidents.
 Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or
fumes.
 Keep children and bystanders away while operating a power tool. Distractions can cause
you to lose control.
 Do not operate the machine in a narrow space.
1.3 Power Tool Use And Care
 Do not force the power tool. Use the correct power tool for your application. The correct
power tool will do the job better and safer at the rate for which it was designed.
 Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
 Disconnect the plug from the power source and/or the battery pack from the power tool
before making any adjustments, changing accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting the power tool accidentally.
 Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool.
 Power tools are dangerous in the hands of untrained users.
 Maintain power tools. Check for misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the power tool’s operation. If damaged,
have the power tool repaired before use. Many accidents are caused by poorly maintained
power tools.
 Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
 Use the power tool, accessories and tool bits etc. in accordance with these instructions,
taking into account the working conditions and the work to be performed. Use of the
power tool for operations different from those intended could result in a hazardous situation.
1.4 Battery Tool Use And Care
 Environmental Protection. Please don't discard or burn the waste batteries at will, causing
environmental pollution. If you don't know how to deal with it, please consult the supplier.Be
sure to use the original battery to ensure safety.
 Do not disassemble the battery. Please store the battery in a dry and frost resistant room.
Storage temperature should not be higher than 50℃, please keep dry all the time.