EasyManuals Logo
Home>Domino>Printer>D320i Blue

Domino D320i Blue User Manual

Default Icon
224 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #116 background imageLoading...
Page #116 background image
OPERATION
3-12 L025317 Issue 5 July 2014
SWITCHING ON AND OFF
WARNINGS: (1) The laser marking system must only be used for
its intended purpose.
(2) The laser marking system may only be operated
by trained personel.
(3) Operation is only allowed with all required cables
connected and all parts mounted. Do not
disconnect any cables during operation.
(4) Refer also to PART 1 : “HEALTH & SAFETY” .
CAUTION: The lens cap, used to prevent damage or external
soiling that will cause a reduction in laser
performance, must be removed before operation.
Switching On the Control Unit
At the control panel, release the On/Off button by turning it clockwise. Wait
until the SERVER RUNNING indicator has illuminated.
Switching On the Laser Head
Turn the key switch from position "0" to position "1". To start the laser turn
the key clockwise to the laser symbol and hold it for at least 1 second. The
key automatically turns back to position "1".
For 30 Watt systems, the laser needs a warm-up phase.
For 60 Watt systems, the laser needs a warm-up phase and tests
whether the laser is ready by printing a test print; so there is a very fast
test print before a print signal.
Please follow laser safety precautions before and after switching on
the laser.
The PRINTER BUSY indicator will illuminate when the laser
hardware is switched on.
The PRINTER READY indicator illuminates. After initialising the
Dynamark 4 software and starting the lasers, the marking system is ready.
Laser emission is also displayed by a red LED on the rear of the laser unit.
Switching Off the Laser Head
(1) Turn the key switch from position "1" to position "0". The laser
hardware is switched off.
Switching Off the Control Unit
(1) Press the On/Off button. The computer will immediately switch off.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Domino D320i Blue and is the answer not in the manual?

Domino D320i Blue Specifications

General IconGeneral
BrandDomino
ModelD320i Blue
CategoryPrinter
LanguageEnglish

Related product manuals